On request
Illustrative image
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 158-3698-001
#158-3698-001
On request
Hydraulic Geroler Spool Valve Motor - T-Series, 4 in³/r, 2-Bolt Flange - 4.00 in Pilot - SAE B
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 158-3698-001
- Constant clearance Geroler‚ geometry
- Optimized drive system with reduced running angle
- Three-pressure zone design, (ability to reduce case pressure)
- Variety of displacements, shafts and mounts
- Special options to meet customer needs
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | T-Series |
| Actual mounting flange | 5 Bolt: Dia 31.47 [1.239] X 5.1 [.20] Pilot .250-28 Unf Mounting |
| Displacement | 4.00 in³/r |
| Maximum operating temperature | 180 °F |
| Maximum rpm-continuous | 849 rpm |
| Intermittent flow rate | 18 gpm |
| Continuous torque | 1222 in-lbs |
| Intermittent pressure | 2750 psi |
| Continuous pressure | 2250 psi |
| Intermittent torque | 1488 in-lbs |
| Continuous flow rate | 15 gpm |
| Replacement buna seal kit - sold separately | 001 Design - 60564-000 |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement viton seal kit - sold separately | 001 Design - 60565-000 |
| Motor port size | 7/8?14 UNF-2B |
| Replacement bearing race - sold separately | 001 Design - 7462-000 |
| Shaft type | Straight |
| Replacement needle thrust bearing | 001 Design 7537-000 |
| Output shaft size | 1 in Straight - Woodruff Key |
| Replacement short cap screw (mounting end) - sold separately | 001 Design - 16292-088 - 4 Required |
| Mounting type | 2-olt Flange - 4.00 in Pilot - SAE B |
| Repair manual# | 7-1450 |
| Seal type | Standard |
| Repair parts drawing# | 6-146 |
| Case drain | 7/16?20 UNF-2B SAE O-Ring Ports |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/158-3698-001/ |
| Inlet and outlet port size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Actual port type | .875-14 Unf-2B O-ring Port |
| Actual output shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And .250-20 Unc-2B Threaded Hole |
Related products
Illustrative image
Illustrative image
Illustrative image