On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 103-3381-012
#103-3381-012
On request
Hydraulic Geroler Spool Valve Motor - S-Series, 10.1 in³/r, 4-Bolt Flange - 1.75 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 103-3381-012
- Constant clearance Geroler‚ design
- Three moving components (gerotor, drive, shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | S-Series |
| Overall length | 151.8 mm |
| Displacement | 10.10 in³/r |
| Overall width | 107.7 mm |
| Maximum rpm-continuous | 343 rpm |
| Intermittent flow rate | 20 gpm |
| Continuous torque | 2662 in-lbs |
| Intermittent pressure | 2300 psi |
| Continuous pressure | 1900 psi |
| Intermittent torque | 3191 in-lbs |
| Continuous flow rate | 15 gpm |
| Replacement buna seal kit - sold separately | 008 Design - 60533-000, 009 & 010 Design - 60539-000 |
| Motor port type | National Pipe Tapered Fuel |
| Replacement viton seal kit - sold separately | 008 Design - 60534-000, 009 & 010 Design - 60546-000 |
| Motor port size | 1/2?14 NPTF |
| Replacement bearing race - sold separately | 008, 009 & 010 Design - 7462-000 |
| Shaft type | Straight |
| Replacement needle thrust bearing | 008, 009 & 010 Design - 7537-000 |
| Output shaft size | 1 in Straight - Woodruff Key |
| Replacement geroler - sold separately | 010 Design - 8632-004 |
| Mounting type | 4-Bolt Flange - 1.75 in Pilot |
| Replacement drive - sold separately | 010 Design - 8664-000 |
| Seal type | Standard |
| Replacement short cap screw (mounting end) - sold separately | 008, 009 & 010 Design - 16292-088 - 4 Required |
| Case drain | No Case Drain |
| Replacement long cap screw (cap end) - sold seprately | 010 Design - 16294-200 - 7 Required |
| Inlet and outlet port size | 1/2-14 NPTF Ports Size 8MP |
| Repair parts drawing# | 6-125 |
| Actual port type | .500-14 NPTF Dryseal Pipe thread Ports |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/103-3381-012/ |
| Actual output shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And 1/4-20 Threaded Hole |
| Actual mounting flange | 4 Bolt Std: 44.4 [1.75] Dia. X 3.0 [.12] Pilot, .375-16 Mounting Holes On 82.6 [3.25] Dia. B.C. |
| Maximum operating temperature | 180 °F |
Related products
Illustrative image
Illustrative image
Illustrative image