On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 129-0067-002
#129-0067-002
On request
Hydraulic Geroler Spool Valve Motor - J-Series, 1.21 in³/r, 2-Bolt - 2.48 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 129-0067-002
- Constant clearance Geroler set
- Integrated check valves
- Self-lubricating shaft bushing
- High-strength rigid components
- Increased valve seal lands
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | J-Series |
| Intermittent torque | 405 in-lbs |
| Displacement | 1.21 in³/r |
| Peak torque | 425 in-lbs |
| Maximum rpm-continuous | 1043 rpm |
| Replacement buna seal kit - sold separately | 002 Design - 60580-000 |
| Continuous torque | 333 in-lbs |
| Replacement bearing race - sold separately | 002 Design - 16241-C1220 |
| Continuous pressure | 2030 psi |
| Replacement needle thrust bearing | 002 Design - 16241-1220 |
| Continuous flow rate | 5.5 gpm |
| Replacement output shaft - sold separately | 002 Design - 201354-002 |
| Motor port type | Metric Threaded O-Ring |
| Replacement geroler - sold separately | 002 Design - 201404-003 |
| Motor port size | M14 x 1.5 |
| Replacement drive - sold separately | 002 Design - 23017-003 |
| Shaft type | Straight |
| Replacement drive spool - sold separately | 002 Design - 23016-003 |
| Output shaft size | 16 mm Straight - Square Key |
| Replacement short cap screw (mounting end) - sold separately | 002 Design - 16148-426 - 5 Required |
| Mounting type | 2-Bolt - 2.48 in Pilot |
| Replacement housing, bearing side (front) - sold separately | 002 Design 201334-002 |
| Seal type | Standard |
| Replacement rear housing - sold separately | 002 Design - 201333-019 |
| Case drain | M10 X 1-6H Metric O-ring Port |
| Replacement mounting flange - sold separately | 002 Design - 2 Bolt Kit 60553 |
| Inlet and outlet port size | Metric Threaded O-ring - M14 X 1-1/2 6H Port Size |
| Weight | 4.8 lbs |
| Actual port type | M14 X 1.5-6H Metric O-ring Port, End Ported |
| Repair manual# | 7-144 |
| Actual output shaft | Dia 16 [.630] Straight With Straight 5 [.197] Sq Key With M6 X 1 Threaded Hole |
| Repair parts drawing# | 6-01-147 |
| Actual mounting flange | 2 Bolt: Dia 62.99 [2.480] X 2.0 [.08] Pilot Dia 9 [.354] Mounting |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/129-0067-002/ |
| Maximum operating temperature | 180 °F |
| Intermittent flow rate | 6.5 gpm |
| Intermittent pressure | 2400 psi |
| Peak pressure | 3190 psi |
Related products
Illustrative image
Illustrative image
Illustrative image