On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 129-0311-002
#129-0311-002
On request
Hydraulic Geroler Spool Valve Motor - J-Series, 0.50 in³/r, 5-Bolt - 1.239 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 129-0311-002
- Constant clearance Geroler set
- Integrated check valves
- Self-lubricating shaft bushing
- High-strength rigid components
- Increased valve seal lands
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | J-Series |
| Peak torque | 193 in-lbs |
| Displacement | 0.50 in³/r |
| Replacement buna seal kit - sold separately | 002 Design - 60580-000 |
| Maximum rpm-continuous | 1992 rpm |
| Replacement bearing race - sold separately | 002 Design - 16241-C1220 |
| Continuous torque | 141 in-lbs |
| Replacement needle thrust bearing | 002 Design - 16241-1220 |
| Continuous pressure | 2030 psi |
| Replacement output shaft - sold separately | 002 Design - 201354-006 |
| Continuous flow rate | 4.5 gpm |
| Replacement geroler - sold separately | 002 Design - 201404-001 |
| Motor port type | Metric Threaded O-Ring |
| Replacement drive - sold separately | 002 Design - 23017-001 |
| Motor port size | M14 x 1.5 |
| Replacement drive spool - sold separately | 002 Design - 23016-001 |
| Shaft type | Splined |
| Replacement short cap screw (mounting end) - sold separately | 002 Design - 16148-422 - 5 Required |
| Output shaft size | 16.5 mm Spline B17 X 14 Din 5482 |
| Replacement housing, bearing side (front) - sold separately | 002 Design 201334-002 |
| Mounting type | 5-Bolt - 1.239 in Pilot |
| Replacement rear housing - sold separately | 002 Design - 201333-019 |
| Seal type | Standard |
| Replacement mounting flange - sold separately | 002 Design - 2 Bolt Kit 60553 |
| Case drain | No Case Drain |
| Weight | 4.4 lbs |
| Inlet and outlet port size | Metric Threaded O-ring - M14 X 1-1/2 6H Port Size |
| Recommended fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Actual port type | M14 X 1.5-6H Metric O-ring Port, End Ported |
| Recommended filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual output shaft | Dia 16.5 [.650] B17 X 14 Din 5482 Spline With M6 X 1 Threaded Hole |
| Repair manual# | 7-144 |
| Actual mounting flange | 5 Bolt: Dia 31.47 [1.239] X 5.1 [.20] Pilot M6 X 1 Mounting |
| Repair parts drawing# | 6-01-147 |
| Maximum operating temperature | 180 °F |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/129-0311-002/ |
| Intermittent flow rate | 5.5 gpm |
| Intermittent pressure | 2400 psi |
| Peak pressure | 3190 psi |
| Intermittent torque | 164 in-lbs |
Related products
Illustrative image
Illustrative image
Illustrative image