On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 158-3201-001
#158-3201-001
On request
Hydraulic Geroler Spool Valve Motor - T-Series, 11.9 in³/r, 2-Bolt Flange - 3.25 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 158-3201-001
- Constant clearance Geroler‚ geometry
- Optimized drive system with reduced running angle
- Three-pressure zone design, (ability to reduce case pressure)
- Variety of displacements, shafts and mounts
- Special options to meet customer needs
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | T-Series |
| Intermittent pressure | 2500 psi |
| Displacement | 11.90 in³/r |
| Intermittent torque | 3864 in-lbs |
| Maximum rpm-continuous | 287 rpm |
| Replacement buna seal kit - sold separately | 001 Design - 60564-000 |
| Continuous torque | 3178 in-lbs |
| Replacement viton seal kit - sold separately | 001 Design - 60565-000 |
| Continuous pressure | 2000 psi |
| Replacement bearing race - sold separately | 001 Design - 7462-000 |
| Continuous flow rate | 15 gpm |
| Replacement needle thrust bearing | 001 Design 7537-000 |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement output shaft - sold separately | 001 Design - 7360-001 |
| Motor port size | 7/8?14 UNF-2B |
| Replacement geroler - sold separately | 001 Design - 22801-008 |
| Shaft type | Straight |
| Replacement drive - sold separately | 001 Design - 201111-006 |
| Output shaft size | 1 in Straight - Woodruff Key |
| Replacement short cap screw (mounting end) - sold separately | 001 Design - 16292-088 - 4 Required |
| Mounting type | 2-Bolt Flange - 3.25 in Pilot |
| Replacement long cap screw (cap end) - sold seprately | 001 Design - 16294-262 - 7 Required |
| Seal type | High Pressure |
| Replacement rear housing - sold separately | 001 Design - 201285-001 |
| Case drain | No Case Drain |
| Replacement mounting flange - sold separately | 001 Design - 22000-001 |
| Inlet and outlet port size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Repair manual# | 7-1450 |
| Actual port type | .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926 |
| Repair parts drawing# | 6-146 |
| Actual output shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And .250-20 Unc-2B Threaded Hole |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/158-3201-001/ |
| Actual mounting flange | Standard, 2 Bolt: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Holes On 106.2 [4.18] Dia. Bolt Circle |
| Maximum operating temperature | 180 °F |
| Intermittent flow rate | 20 gpm |
Related products
Illustrative image
Illustrative image
Illustrative image