On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 109-1154-006
#109-1154-006
On request
Hydraulic Geroler Disc Valve Motor - 4000 - Standard, 109.8 cm³/r Max Geometric Displacement, 3000 psi Maximum Operating Pressure
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC DISC VALVE MOTORS |
| Series | 4000 - Standard |
| Port orientation | Staggered Ports |
| Displacement | 6.70 in³/r |
| Replacement balance ring - sold separately | 006 Design -21316-000 1 Required |
| Maximum operating pressure | 3000 psi |
| Replacement buna seal kit - sold separately | 006 Design - Rear Seal Kit 61234-000, 006 Design - Shaft Seal Kit 61281-000 - 1 Required Each |
| Continuous torque | 2850 in-lbs |
| Replacement drive - sold separately | 006 Design - 21372-001 - 1 Required |
| Maximum rpm | 697 rpm |
| Replacement drive valve - sold separately | 006 Design - 8510-000 - 1 Required |
| Mounting type | 4-Bolt Flange - 5 in Pilot - SAE C |
| Replacement geroler - sold separately | 006 Design - 8464-001 - 1 Required |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement housing, bearing side (front) - sold separately | 006 Design - 23170-002 - 1 Required |
| Motor port size | 1-1/16?12 UNF-2B |
| Replacement long cap screw (cap end) - sold seprately | 006 Design - 16292-162 - 8 Required |
| Shaft type | Splined |
| Replacement mounting flange - sold separately | 006 Design - 23171-003 - 1 Required |
| Maximum flow rate | 20 gpm |
| Replacement output shaft and bearing kit - sold separately | 006 Design - 23310-006 - 1 Required |
| Maximum operating temperature | 180 °F |
| Replacement plate valve - sold separately | 006 Design - 8504-000 - 1 Required |
| Output shaft size | 1-1/4 in 14T Spline |
| Replacement rear housing - sold separately | 006 Design - 23382-003 - 1 Required |
| Operation mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement valve-sold separately | 006 Design - 8500-000 - 1 Required |
| Drain connection size | .4375-20 Unf-2b O-ring Port Size -4 With Check Valve |
| Replacement viton seal kit - sold separately | 006 Design - 61248-000 - 1 Required |
| Operation rating description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Actual mounting flange | 4-Bolt Flange - Sae C - With 5 In. Pilot Dia. |
Related products
Illustrative image
Illustrative image
Illustrative image