On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 105-1240-006
#105-1240-006
On request
Hydraulic Geroler Disc Valve Motor - 2000 - Wheel, 489 cm³/r Max Geometric Displacement, 1750 psi Maximum Operating Pressure
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC DISC VALVE MOTORS |
| Series | 2000 - Wheel |
| Replacement balance ring - sold separately | 006 Design - 8915-000 - 1 Required |
| Displacement | 29.84 in³/r |
| Replacement buna seal kit - sold separately | 006 Design - 61258-000 - 1 Required |
| Maximum operating pressure | 1750 psi |
| Replacement drive - sold separately | 006 Design - 21371-012 - 1 Required |
| Continuous torque | 7479 in-lbs |
| Replacement drive valve - sold separately | 006 Design - 8433-000 - 1 Required |
| Maximum rpm | 153 rpm |
| Replacement geroler - sold separately | 006 Design - 21625-010 - 1 Required |
| Mounting type | 4-Bolt Flange - 4.25 in Pilot |
| Replacement housing, bearing side (front) - sold separately | 006 Design - 21578-003 - 1 Required |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement long cap screw (cap end) - sold seprately | 006 Design - 14384-019 - 4 Required |
| Motor port size | 7/8?14 UNF-2B |
| Replacement output shaft and bearing kit - sold separately | 006 Design - 21618-003 - 1 Required |
| Shaft type | Keyed |
| Replacement pin for balance ring - sold separately | 006 Design - 14351-000 - 2 Required |
| Maximum flow rate | 20 gpm |
| Replacement plate valve - sold separately | 006 Design - 22134-000 - 1 Required |
| Maximum operating temperature | 180 °F |
| Replacement rear housing - sold separately | 006 Design - 21564-001 - 1 Required |
| Output shaft size | 1-1/4 in Tapered - Threaded End |
| Replacement valve-sold separately | 006 Design - 21466-000 - 1 Required |
| Included features | Slinger Protector (Seal) |
| Replacement viton seal kit - sold separately | 006 Design - 61263-000 - 1 Required |
| Operation mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement wear place - sold separately | 006 Design - 22102-000 - 1 Required |
| Drain connection size | .4375-20 Unf-2b O-ring Port Size -4 |
| Replacement pin for balancing ring - sold separately | 006 Design - 14351-000 - 2 Required |
| Operation rating description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Actual mounting flange | 4-Bolt Flange - Wheel - With 4-1/4 In. Pilot Dia. |
| Port orientation | Staggered Ports |
Related products
Illustrative image
Illustrative image
Illustrative image