On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 101-1671-009
#101-1671-009
On request
Hydraulic Gerotor Spool Valve Motor - H-Series, 22.6 in³/r, 2-Bolt Flange - 3.25 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 101-1671-009
- Time-tested Char-Lynn drive set
- Three moving components (gerotor-star, drive, and shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | H-Series |
| Replacement buna seal kit - sold separately | 007 Design - 60023-000, 008 & 009 Design - 60540-000 |
| Displacement | 22.60 in³/r |
| Replacement viton seal kit - sold separately | 007 Design - 60032-000, 008 & 009 Design - 60544-000 |
| Maximum rpm-continuous | 152 rpm |
| Replacement bearing race - sold separately | 007, 008 & 009 Design - 7462-000 |
| Continuous torque | 3604 in-lbs |
| Replacement needle thrust bearing | 007, 008 & 009 Design - 7537-000 |
| Continuous pressure | 1250 psi |
| Replacement output shaft - sold separately | 007, 008 & 009 Design - 7360-001 |
| Continuous flow rate | 15 gpm |
| Replacement gerotor - sold seprately | 009 Design - 8277-027 |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement drive - sold separately | 009 Design - 22191-000 |
| Motor port size | 7/8?14 UNF-2B |
| Replacement short cap screw (mounting end) - sold separately | 007, 008 & 009 Design - 16292-088 - 4 Required |
| Shaft type | Straight |
| Replacement long cap screw (cap end) - sold seprately | 009 Design - 16294-325 - 7 Required |
| Output shaft size | 1 in Straight - Woodruff Key |
| Replacement rear housing - sold separately | 009 Design - 22230-001, 008 & 007 Design - 7359-001 |
| Mounting type | 2-Bolt Flange - 3.25 in Pilot |
| Replacement mounting flange - sold separately | 009 & 008 Design 22000-001, 007 Design 7463-000 |
| Seal type | Standard |
| Weight | 14.7 lbs |
| Case drain | 7/16?20 UNF-2B SAE O-Ring Ports |
| Recommended fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Inlet and outlet port size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Recommended filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual port type | .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926 |
| Repair manual# | 7-117 |
| Actual output shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And 1/4-20 Threaded Hole |
| Repair parts drawing# | 6-121 |
| Actual mounting flange | 2 Bolt Std: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Mounting |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/101-1671-009/ |
| Maximum operating temperature | 180 °F |
| Intermittent flow rate | 20 gpm |
| Intermittent pressure | 1500 psi |
| Intermittent torque | 4283 in-lbs |
Related products
Illustrative image
Illustrative image
Illustrative image