On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 112-1162-006
#112-1162-006
On request
Hydraulic Geroler Disc Valve Motor - 6000 - Standard, 982.7 cm³/r Max Geometric Displacement, 2000 psi Maximum Operating Pressure
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC DISC VALVE MOTORS |
| Series | 6000 - Standard |
| Port orientation | Staggered Ports |
| Displacement | 59.97 in³/r |
| Replacement balance ring - sold separately | 006 & 005 Design - 21317-000 - 1 Required |
| Maximum operating pressure | 2000 psi |
| Replacement buna seal kit - sold separately | 006 & 005 Design - Rear Seal Kit 61238-000, 006 & 005 Design Shaft Seal Kit - 61237-000 - 1 Required |
| Continuous torque | 14914 in-lbs |
| Replacement drive - sold separately | 006 & 005 Design - 21373-006 - 1 Required |
| Maximum rpm | 153 rpm |
| Replacement drive valve - sold separately | 006 & 005 Design - 8508-000 - 1 Required |
| Mounting type | 4-Bolt Flange - 5 in Pilot - SAE CC |
| Replacement geroler - sold separately | 006 & 005 Design - 8507-006 - 1 Required |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement housing, bearing side (front) - sold separately | 006 Design - 201839-001, 005 Design - 8490-000 - 1 Required |
| Motor port size | 1-5/16?12 UNF-2B |
| Replacement long cap screw (cap end) - sold seprately | 006 & 005 Design - 14409-012 & 14409-013 - 2 Required Of Each Bolt |
| Shaft type | Keyed |
| Replacement output shaft and bearing kit - sold separately | 006 Design - 201837-010, 005 Design - 8711-010 - 1 Required |
| Maximum flow rate | 40 gpm |
| Replacement plate valve - sold separately | 006 & 005 Design - 21666-000 - 1 Required |
| Maximum operating temperature | 180 °F |
| Replacement rear housing - sold separately | 006 & 005 Design - 8502-004 - 1 Required |
| Output shaft size | 40 mm Straight - Straight Key |
| Replacement valve-sold separately | 006 & 005 Design - 8497-000 - 1 Required |
| Operation mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement viton seal kit - sold separately | 006 & 005 Design - 61246-000 - 1 Required |
| Drain connection size | .4375-20 Unf-2b O-ring Port Size -4 |
| Actual mounting flange | 4-Bolt Flange - Sae Cc - With 5 In. Pilot Dia. |
| Operation rating description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
Related products
Illustrative image
Illustrative image
Illustrative image