On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 158-1013-001
#158-1013-001
On request
Hydraulic Geroler Spool Valve Motor - T-Series, 11.9 in³/r, 4-Bolt Flange - 1.75 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 158-1013-001
- Constant clearance Geroler‚ geometry
- Optimized drive system with reduced running angle
- Three-pressure zone design, (ability to reduce case pressure)
- Variety of displacements, shafts and mounts
- Special options to meet customer needs
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | T-Series |
| Overall width | 85.9 mm |
| Displacement | 11.90 in³/r |
| Intermittent flow rate | 20 gpm |
| Maximum rpm-continuous | 287 rpm |
| Intermittent pressure | 2500 psi |
| Continuous torque | 3178 in-lbs |
| Intermittent torque | 3864 in-lbs |
| Continuous pressure | 2000 psi |
| Replacement buna seal kit - sold separately | 001 Design - 60564-000 |
| Continuous flow rate | 15 gpm |
| Replacement viton seal kit - sold separately | 001 Design - 60565-000 |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement bearing race - sold separately | 001 Design - 7462-000 |
| Motor port size | 7/8?14 UNF-2B |
| Replacement needle thrust bearing | 001 Design 7537-000 |
| Shaft type | Straight |
| Replacement geroler - sold separately | 001 Design - 22801-008 |
| Output shaft size | 1 in Straight - Woodruff Key |
| Replacement drive - sold separately | 001 Design - 201111-006 |
| Mounting type | 4-Bolt Flange - 1.75 in Pilot |
| Replacement short cap screw (mounting end) - sold separately | 001 Design - 16292-088 - 4 Required |
| Seal type | Standard |
| Replacement long cap screw (cap end) - sold seprately | 001 Design - 16294-262 - 7 Required |
| Case drain | No Case Drain |
| Repair manual# | 7-1450 |
| Inlet and outlet port size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Repair parts drawing# | 6-146 |
| Actual port type | .875-14 Unf-2B SAE O-ring Ports |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/158-1013-001/ |
| Actual output shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And .250-20 Unc-2B Threaded Hole |
| Actual mounting flange | Standard, 2 Bolt: 82.6 [3.25] X 3.0 [.12] Pilot, 13.59 [.535] Dia. |
| Maximum operating temperature | 180 °F |
| Overall length | 161.3 mm |
Related products
Illustrative image
Illustrative image
Illustrative image