On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 101-2014-009
#101-2014-009
On request
Hydraulic Gerotor Spool Valve Motor - H-Series, 2.8 in³/r, 4-Bolt
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 101-2014-009
- Time-tested Char-Lynn drive set
- Three moving components (gerotor-star, drive, and shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | H-Series |
| Replacement buna seal kit - sold separately | 001 Design - 60023-000, 002 & 003 Design - 60540-000 |
| Displacement | 2.80 in³/r |
| Replacement viton seal kit - sold separately | 001 Design - 60032-000, 002 & 003 Design - 60545-000 |
| Maximum rpm-continuous | 969 rpm |
| Replacement bearing race - sold separately | 001, 002 & 003 Design - 7462-000 |
| Continuous torque | 650 in-lbs |
| Replacement needle thrust bearing | 001, 002 & 003 Design - 7537-000 |
| Continuous pressure | 1800 psi |
| Replacement output shaft - sold separately | 001, 002 & 003 Design - 7360-027 |
| Continuous flow rate | 12 gpm |
| Replacement gerotor - sold seprately | 003 Design - 8277-001 |
| Motor port type | National Pipe Tapered Fuel |
| Replacement drive - sold separately | 003 Design - 602-000 |
| Motor port size | 1/2?14 NPTF |
| Replacement short cap screw (mounting end) - sold separately | 001, 002 & 003 Design - 16292-088 - 4 Required |
| Shaft type | Straight |
| Replacement long cap screw (cap end) - sold seprately | 003 Design - 16294-150 - 5 Required |
| Output shaft size | 1 in Straight - Woodruff Key - Nickel Plated |
| Replacement rear housing - sold separately | 001, 002 & 003 Design - 21776-002 |
| Mounting type | 4-Bolt |
| Replacement mounting flange - sold separately | 003 & 002 Design 22000-002, 001 Design 7464-000 |
| Seal type | Standard |
| Weight | 11.2 lbs |
| Case drain | No Case Drain |
| Recommended fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Inlet and outlet port size | 1/2-14 NPTF Ports Size 8MP |
| Recommended filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual port type | .500-14 Nptf Dryseal Pipe thread Accepts Dryseal Fittings Per Sae J476A |
| Repair parts drawing# | 6-130 |
| Maximum operating temperature | 180 °F |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/101-2014-009/ |
| Intermittent flow rate | 14 gpm |
| Intermittent pressure | 2400 psi |
| Intermittent torque | 876 in-lbs |
Related products
Illustrative image
Illustrative image
Illustrative image