On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 103-1050-012
#103-1050-012
On request
Hydraulic Geroler Spool Valve Motor - S-Series, 4.6 in³/r, 4-Bolt Flange - 1.75 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 103-1050-012
- Constant clearance Geroler€š design
- Three moving components (gerotor, drive, shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | S-Series |
| Intermittent pressure | 2500 psi |
| Displacement | 4.60 in³/r |
| Intermittent torque | 1649 in-lbs |
| Maximum rpm-continuous | 792 rpm |
| Replacement buna seal kit - sold separately | 008 Design - 60533-000, 009 & 010 Design - 60539-000 |
| Continuous torque | 1325 in-lbs |
| Replacement viton seal kit - sold separately | 008 Design - 60534-000, 009 & 010 Design - 60546-000 |
| Continuous pressure | 2000 psi |
| Replacement bearing race - sold separately | 008, 009 & 010 Design - 7462-000 |
| Continuous flow rate | 15 gpm |
| Replacement needle thrust bearing | 008, 009 & 010 Design - 7537-000 |
| Motor port type | National Pipe Tapered Fuel |
| Replacement output shaft - sold separately | 008, 009 & 010 Design - 7360-002 |
| Motor port size | 1/2?14 NPTF |
| Replacement geroler - sold separately | 010 Design - 8632-024 |
| Shaft type | Splined |
| Replacement drive - sold separately | 010 Design - 22250-000 |
| Output shaft size | 1 in SAE - 6B Spline |
| Replacement short cap screw (mounting end) - sold separately | 008, 009 & 010 Design - 16292-088 - 4 Required |
| Mounting type | 4-Bolt Flange - 1.75 in Pilot |
| Replacement long cap screw (cap end) - sold seprately | 010 Design - 16294-150 & Washer Seal 14488-000 - 7 Required |
| Seal type | Standard |
| Replacement rear housing - sold separately | 008, 009 & 010 Design - 8631-002 |
| Case drain | No Case Drain |
| Replacement mounting flange - sold separately | 010 & 009 Design 22000-002, 008 Design 7464-000 |
| Inlet and outlet port size | 1/2-14 NPTF Ports Size 8MP |
| Repair parts drawing# | 6-125 |
| Actual port type | .500-14 Nptf Dryseal Pipe thread Accepts Dryseal Fittings Per Sae J476A |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/103-1050-012/ |
| Actual output shaft | 25.4 [1.00] Sae 6B Spline With 1/4-20 Threaded Hole |
| Actual mounting flange | 4 Bolt Std: 44.4 [1.75] Dia. X 3.0 [.12] Pilot, .375-16 Mounting |
| Maximum operating temperature | 180 °F |
| Intermittent flow rate | 20 gpm |
Related products
Illustrative image
Illustrative image
Illustrative image