On request
CHAR-LYNN (EATON)
Call
CHAR-LYNN (EATON) 103-1087-012
#103-1087-012
On request
Hydraulic Geroler Spool Valve Motor - S-Series, 18.2 in³/r, 2-Bolt Flange - 3.25 in Pilot
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
CHAR-LYNN (EATON) — CHAR-LYNN (EATON) 103-1087-012
- Constant clearance Geroler€š design
- Three moving components (gerotor, drive, shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
Specifications
| Brand | CHAR-LYNN (EATON) |
| Category | HYDRAULIC SPOOL VALVE MOTORS |
| Series | S-Series |
| Overall width | 98.3 mm |
| Displacement | 18.20 in³/r |
| Intermittent flow rate | 20 gpm |
| Maximum rpm-continuous | 190 rpm |
| Intermittent pressure | 1800 psi |
| Continuous torque | 4345 in-lbs |
| Intermittent torque | 4467 in-lbs |
| Continuous pressure | 1500 psi |
| Replacement buna seal kit - sold separately | 008 Design - 60533-000, 009 & 010 Design - 60539-000 |
| Continuous flow rate | 15 gpm |
| Replacement viton seal kit - sold separately | 008 Design - 60534-000, 009 & 010 Design - 60546-000 |
| Motor port type | Straight Thread O-Ring SAE |
| Replacement bearing race - sold separately | 008, 009 & 010 Design - 7462-000 |
| Motor port size | 7/8?14 UNF-2B |
| Replacement needle thrust bearing | 008, 009 & 010 Design - 7537-000 |
| Shaft type | Splined |
| Replacement output shaft - sold separately | 008, 009 & 010 Design - 7360-002 |
| Output shaft size | 1 in SAE - 6B Spline |
| Replacement geroler - sold separately | 010 Design - 8632-026 |
| Mounting type | 2-Bolt Flange - 3.25 in Pilot |
| Replacement drive - sold separately | 010 Design - 22253-000 |
| Seal type | Standard |
| Replacement short cap screw (mounting end) - sold separately | 008, 009 & 010 Design - 16292-088 - 4 Required |
| Case drain | No Case Drain |
| Replacement long cap screw (cap end) - sold seprately | 010 Design - 16294-275 - 7 Required |
| Inlet and outlet port size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Replacement rear housing - sold separately | 008, 009 & 010 Design - 8631-001 |
| Actual port type | .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926 |
| Replacement mounting flange - sold separately | 010 & 009 Design 22000-001, 008 Design 7463-000 |
| Actual output shaft | 25.4 [1.00] Sae 6B Spline With 1/4-20 Threaded Hole |
| Repair parts drawing# | 6-125 |
| Actual mounting flange | 2 Bolt Std: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Mounting |
| Manufacturer product page | http://www.eatonpowersource.com/products/configure/motors/details/103-1087-012/ |
| Maximum operating temperature | 180 °F |
| Overall height | 133.9 mm |
| Overall length | 169 mm |
Related products
Illustrative image
Illustrative image
Illustrative image