On request
POWER TEAM (SPX)
Call
POWER TEAM (SPX) PQ1203S
#PQ1203S
On request
PQ120 Heavy Duty Electric Pump - Single-Acting, 3 hp, 5.70 gal Reservoir, 1250.0 in³ Usable Capacity, 120 in³/min Flow at Max psi, 460 V, 60 Hz
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
POWER TEAM (SPX) — POWER TEAM (SPX) PQ1203S
- Designed specifically for heavy duty, extended cycle operations—up to 400 tons
- Start and operate under full load, even with voltage reduced 10 %
- Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption
- Internal relief valve limits pressure to 10,000 psi. External relief valve is adjustable from 1,000 to 10,000 psi
- Pump prewired at factory with a 3hp, 460 volt, 60 Hz. 3 Phase motor with thermal overload protection—motor starter and heater element supplied as standard equipment
Specifications
| Brand | POWER TEAM (SPX) |
| Category | ELECTRIC HYDRAULIC PUMPS |
| Pump type | PQ120 Heavy Duty Electric Pump |
| Reservoir capacity (cubic inches) | 1316.7 in³ |
| For use with | Single-Acting Cylinders |
| Usable oil capacity | 1250 in³ |
| Power rating | 3 hp |
| Typical flow at max psi | 120 in³/min |
| Voltage | 460 V |
| Typical flow at 10000 psi | 120 in³/min |
| Frequency | 60 Hz |
| Typical flow at 5000 psi | 130 in³/min |
| Amperage | 10.5 A |
| Typical flow at 1000 psi | 160 in³/min |
| Motor phase | 3 ph |
| Typical flow at 100 psi | 730 in³/min |
| Max amp draw @ 10000 psi | 10.5 @ 230 , 5.3 @ 460 A, A, V |
| Maximum pressure | 10000 psi |
| Max rpm | 1725 rpm |
| Sound level at idle/10000 psi | 73/78 dB(a) |
| Valve part number | 9599 |
| Overall length | 15.5 in |
| Valve type | 3-Way, 3-Position (Pilot Operated) Solenoid Valve w/ Posi-Check® |
| Overall width | 14.25 in |
| Valve type/function | 3-Way, -Position / Advance Hold Return |
| Overall height | 25.125 in |
| Valve function details | ?Advance,? ?hold? and ?return? positions. When in ?advance,? solenoid ?B? is energized and oil goes from pump to cylinder through pressure port. In ?return? position, solenoid ?A? is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in ?hold? position, oil from pump is directed back to reservoir while oil is checked in cylinder. The Posi-Check® feature holds load when shifting from ?advance? to ?hold? position. |
| Weight | 180 lbs |
| Control switch | Run/Off/Pulse |
| Manufacturer product page | http://www.spxflow.com/en/power-team/pd-pq120-electric/ |
| Reservoir capacity | 5.7 gal |
